The CS-PLUS cap sealing system is designed for higher speed cap sealing applications, to line speed of 50 meters (150 ft.) per minute .
Induction sealing is a non-contact process which bonds a foil disk or "seal" to the opening of a container. It can be used for most types of containers and can be used for foods, drugs, chemicals or petroleum products.
The inner seals meet the requirements of the FDA and can be used on containers of all compositions.
Induction sealing will provide the user with a tamper evident seal to assure product integrity and prevent leakage. This will increase the products shelf life, reduce pilferage, and increase customer confidence in your product.
The machine is portable and able to be used in multiple locations.
The solid state circuitry and built-in timer provide high control of the sealing process.
A variety of power settings is available to meet the specific requirements of the application.
Caps with diameters from 5 mm to 120 mm may be sealed.
It is shipped assembled and ready to use. The vertical adjustment mechanism allows quick and easy adjustment of the sealing head height to meet your production line.
No tools are required for adjustment or set-up. It requires no maintenance and it is air cooled, requiring no water for cooling.
It is silent and has no discharge.
Operator controls allow entry of sealing parameters, and monitor the power,
current, frequency, phase, temperature and communication.
Interface Panel: It allows other accessories to be attached to the machine.
Light Tower: The light tower monitors the status of the machine. It includes yellow, green and red status lights and two sirens.
Remote Control Panel: This allows the machine to be monitored and controlled from a remote location.
Skewing Bracket: This swivel bracket allows the sealing of containers with diameters of 60 mm and larger by allowing angular adjustment of the sealing head.
Wheeled Cart: To make the machine portable and able to be used in multiple locations.
Cap Detection System: The system detects improperly capped and sealed containers.
Maximum Conveyor Speed (depending on the cap size): 70 m/min.
Footprint: 75 cm x 80 cm (30" x 32")
Height Below Sealing Head: Minimum: 105 cm (40"), Maximum: 155 cm (60")
Weight: 85 kg. (185 lb), Boxed: 115 kg (245 lb)
Electrical Consumption: 8 amps
Electrics Required: 110-120 v, or 220-240 v. 50-60 hz, 1 phase. Transformers are available for use with other voltage electrical supply.
Maximum Conveyor Speed (depending on the cap size): 100 m/min.
Footprint: : 75 cm x 80 cm (30" x 32")
Height Below Sealing Head: Minimum: 105 cm (40"), Maximum: 155 cm (60")
Weight:: 95 kg. (200 lb), boxed: 115 kg (250 lb)
Electrical Consumption: 7.5 amps
Electrical connection: 230 v, 50-60 hz, 3-Phase. Transformers are available for other voltages.
INDUCTION SEALING MACHINES INDUCTION SEALING PROCESS CAP TIGHTENERS HOME REQUEST INFORMATION
CS PLUS Inline Induction Sealers (.pdf)